Payload: 135g/0.297lb with camera clip
Compatible Cameras: Gopro Hero 8/7/6/5, Control and compatible with YI 4K,SJ 6 LEGEND, RICCA and compatible with other action camera with the weight less than 135g by changing the camera clip.
1300mAh (built-in battery, charging via Micro USB port on handle side)
≥2h (recommend using 5V/2A adapter for charging battery, quick charging is forbidden)
279g (include built-in battery, NOT include camera)
Tilting range: 330°(with limitation)
Rolling range: 195°(with limitation)
Panning range: 330°(with limitation)
Tilt range: +150° to -180°
Roll range: +80° to 115°
Pan range: +85° to 245°
ABS&PC compound materials
Unlock the motor lock: Vimble2A has Roll and Pan motor lock, please make sure to unlock them before mounting camera.
Camera mounting(quick release clip usage as image)
① When camera lens is forwarding, tilt motor will be on left side(unique design for camera clip, which can not be place on right side)
② Don't have to balance before powering on.
WIFI control: Connecting camera Wifi via Feiyu ON App, it can control camera in the function of photography/video recording/time-lapse after the connection succeeded.
Auto -connecting: After successful connection at first time, gimbal will reconnect to camera automatically when restart camera&gimbal. The green light flashes twice every five seconds, connection succeeded.
indicator light description:
On power-on status, press&hold trigger button+shutter button , and then turn the slider button down, red light flashing twice means disconnect the WIFI.
Pan mode: The roll and tilt direction are fixed, and the camera moves according to the left-right movements of user's hand.[Default mode when power on&reset]
Follow mode: The roll direction is fixed, and camera moves according to the left-right movements, up-down movements of user's hand.(double tap function button)
All follow mode: All three axis of gimbal follows the movements of user's hand.(triple tap function button)
Lock mode: The orientation of the camera is fixed, whatever the movements of hand(single tap function button)
There are 2 extended ports in handle
1/4inch thread hole at the bottom of handle to mount Tripod or other accessories.
Micro USB port on the left side of handle for charging gimbal.
Micro USB cable*1,
Polyester Carry bag*1
It uses a built-in rechargeable battery, the capacity is 1300mAH, the voltage is 7.4V~8.4V.
The theoretical battery time is about 10 hours(well-balanced status).
It supports charging the battery directly from the USB port on the gimbal handle, and supports using the gimbal while charging.
It may take ≥2h, and the 5V/2A charging adapter is recommended. (equipped by users, fast charging is not allowed).
Charging status: indicator keeps solid red
Fully charged status: indicator turns green
1) Low battery.
If the red light flash three times at a time, that means the gimbal is in low battery.
2) Protecting mode.
-When the handle is not being hold but completely free, the gimbal will shutdown to protect itself.
-The gimbal is not balanced and the motors get overheat.
-Make sure to unlock all axis.
Firstly, keep the gimbal vertical.
Secondly, double tap the trigger button to go back to normal position.
Initialize the gimbal and decrease the dead zone of the pan axis.
Single press the shutter button to take a photo or start/stop recording video (when the GoPro is in video mode).
Press and hold the shutter button for 3 seconds to switch between photo and video mode.
The Vimble 2A can be updated via Feiyu ON APP, there are gimbal firmware, keypad board firmware and
Bluetooth firmware that can be updated.
After successfully updating, you need to hold the power button for around 10 seconds to boot it up.
When the gimbal is on, press and hold the trigger button and the shutter button, then push down the roll
control stick (the one on the right side).
Note: After cleaning up the WiFi settings, the connection status in the APP will disappear.
You can also see the indicator will flash red light for two times every moment.
If there are no signs from the APP and indicator, please try cleaning again.
1) Make sure to tighten up the camera with the adapter.
2) Make sure the gimbal stays still wen turning it on.
3) Adjust the motor strength to proper values.
1) Make sure to unlock all axis and properly balance the gimbal before powering on.
2) Adjust the motor strength with the Feiyu ON application.
Initialize the gimbal:
1) Press the power/function button five times quickly to enter initialization mode.
2) Lie down the gimbal on a flat surface and keep it still.
3) Wait for the indicator to turn into flashing blue light from solid blue.
4) Single press the function button to finish the initialization.
1) Try turning off the WiFi of the camera for 30 seconds and turn on again.
2) Clean up the WiFi connection of the gimbal and connect manually.
The Vimble 2A is not waterproof.
Hi! Is this Gimbal working with GoPro Hero 9? Separate Adapter availability?
The Vimble 2A does not work with the GoPro Hero 9. No separate adapters are available.
With the Feiyu New Vimble 2A, do you have also the gopro hero 8 mount in the package ? Thank you. Best Regards
New Vimble 2A gimbal is mounted with new common mount which suitable for Gopro hero 8.
Can this be compatible with the DGI Osmo Action
Vimble 2A is not compatible with Dji Osmo Action.
Is is compatible with GoPro Hero 4?
Vimble 2A is compatible with GoPro Hero 4.
can you also use a smart phone with this gimbal?
Vimble 2A gimbal is only for action camera, not for smartphone, but we have other gimbals for smartphone, as below: Smartphone Gimbal Collection
is this gimbal water resistant ? I mean just spray not underwater of course
The Vimble 2A gimbal is not water resistant.