(überholt) SCORP OLED-Touchscreen-Steuerung 3-Achsen-Hand-Gimbal-Stabilisator für spiegellose DSLR-Kamera

1) Connect Image Transmission Device:
SCORP: Support, can view the camera footage via touch screen and APP
SCORP-C: Support, need to connect with APP to view camera footage
2) Gimbal Control:
SCORP: Buttons + touch screen, very convenient and no need to connect with APP
SCORP-C: Buttons only, part of functions and parameters setting need to achieve via APP
3) Magic Ring:
SCORP: Electronic magic ring, support to customize damping
SCORP-C: Normal magic ring, cannot customize operating feel
4) Adjust Motor Power
SCORP: Support adjust motor power via touch screen, use auto tune to adjust the motor power automatically, or adjust motor power for each axis manually
SCORP-C: Use the motor auto tune button to adjust the motor power automatically, or adjust motor power for each axis manually after connect with APP
5) Gimbal Parameters Setting
Timelapse, Panorama, Track Video:
SCORP: Support, can complete the settings on touch screen
SCORP-C: Support, need to connect with APP to set up

The max payload is about 2500g (balanced status).
NOTE: If the lens is too large and heavy, the gimbal may not balance well.

1) Make sure to fully charge the gimbal before turning on;
2) Make sure all the axis locks are unlocked, as shown in pictures below;


3) Make sure to balance the gimbal in every axis, until the camera stays balanced at any angle.
Tilt the gimbal and support it by the foldable legs to check if the pan axis is balanced.
Balanced status:

Imbalanced status:

The Feiyu SCORP uses 18650 battery, which is built-in and not removable.
It should be charged by USB Type C cable with a charging adapter of which the power is no more than 18W.

The charging port is under the multi-function knob, and above the trigger button;
It takes about 3 hours to fully charge with a 5V-2A charging adapter;
It supports fast charging up to 18W, by which it takes about 1.6 hours to fully charge.

For iPhone users, search “Feiyu SCORP” in APP Store to download the APP; For Android users, search “Feiyu SCORP” in Google Play Store to download it. You can use the APP to update gimbal firmware, adjust gimbal parameters, remotely control gimbal directions etc.

1) Make sure the camera is tightly mounted and balanced in every axis;
2) Tap on Motor Power > Auto Tune > Start Tuning, then wait until tuning completes.

Hold up the arm for a bit with one hand, then you can move the arm and tighten the screw easily. Release the arm after finishing balancing the axis.

Long press: turning on/off
Single press (when in sleep mode): wake up from sleep mode
Double press: enter sleep mode

Single press: switching between Lock Mode and PF Mode (Pan Follow)
Double press: switch to PTF Mode (Pan&Tilt Follow)
Triple press: switch to FPV Mode