Feiyu Pocket 2

Feiyu Pocket 2 has a built-in rechargeable battery, of which the capacity is 875mAh, 6.738Wh and voltage is about 7.7V. Charging the battery through USB-C port.
Usage time: 220 min while working at 1080p 60fps, and 190 min while working at 4K 30fps.

About 1.2h with 10W charger, 5V/2A charger is recommended.
The indicator is solid red while charging, and solid green while fully charged. Note: no continuous charging for more than 12 hours.

Yes it supports, but requires a dedicated Type C to 3.5mm MIC adapter. Microphone with power supply is recommended.

No, but it has an optional accessory - Waterproof Case.

You can download and install the Feiyu Cam APP from Google Play/App Store. After connecting the Feiyu Cam APP, you can use it for image transmission, take picture and download file, etc.
P.S. For the first time to use the Feiyu Cam App, it requires logging in by phone number or Email.

Max Capacity supported: 512G. For recording Super Hight quality video, U3 and higher speed SD Card is required (minimum writing speed > 30MBps)

1) When taking photos or videos, you can check the amount of remaining photos or video duration at the bottom of the main screen.
2) You can also check the free space in the setting menu.

Tap on the zoom button on the right side of the screen, pull it up and down to zoom in and out. It supports 1x to 4x digital zoom.

For Super high quality, the video bit rate is up to 120Mbps (As a comparison, the highest bit rate supported by Sony A7M3 is 100Mbps), which can reduce video noise.

1) Remove the MicroSD card and connect with a computer with card reader, then copy the files to the computer
2) When the Pocket cam is on, connect with a computer with USB-C cable, select Udisk mode, then copy the files to the computer. (Transmission rate for the port is about 22MB/s)
3) Connect with the Feiyu Cam APP, download the pictures and videos to your phone. (Transmission rate≤3MB/s)

Swipe left to enter the shooting setting, then select “Video” to set up the resolution&frame rate for video shooting.

It requires to connect to the Feiyu Cam App and view the composed panoramic photos in the APP.

On the gimbal itself, you can set up with two points, which are the start and end points. On the Feiyu Cam App, it supports 10 points.

It supports 2*2, 3*3 and 180° panorama modes.

Tilt the handle 90° from left or right and keep it vertically. (Note: 4k48/50/60 and 1080P120 videos can not be displayed vertically on the camera screen)

In this mode, you can adjust EXP, WB and Color.

1)Double press the joystick to recenter
2)Control the camera direction while in the default interface
3)Switch files when on the file preview interface
4)Change volume (up/down) when playing back videos
5)Press to play and pause the video

Dead zone exists in all the follow modes, it’s for the smoothness while switching the gimbal from still to moving status.

It is recommended to do straight-line shooting in Pan mode or Lock mode.

You can calibrate the device: swipe down to enter the setting menu, then click “Calibration” to calibrate it.

The motion mode is suitable for following fast-moving objects. Smooth mode is recommended in daily shooting scenarios.

Press and hold the power button over 7 seconds to reset the pocket cam.
Note: after forced shutdown, you need to hold the power button 3 seconds and release it, then press again and hold for 2 to 3 seconds to turn it on.