(Überholt) SCORP-C-Knopfsteuerung, 3-Achsen-Hand-Gimbal-Stabilisator für spiegellose DSLR-Kamera (NUR Versand in die USA)

1) Connect Image Transmission Device:
SCORP: Support, can view the camera footage via touch screen and APP
SCORP-C: Support, need to connect with APP to view camera footage
2) Gimbal Control:
SCORP: Buttons + touch screen, very convenient and no need to connect with APP
SCORP-C: Buttons only, part of functions and parameters setting need to achieve via APP
3) Magic Ring:
SCORP: Electronic magic ring, support to customize damping
SCORP-C: Normal magic ring, cannot customize operating feel
4) Adjust Motor Power
SCORP: Support adjust motor power via touch screen, use auto tune to adjust the motor power automatically, or adjust motor power for each axis manually
SCORP-C: Use the motor auto tune button to adjust the motor power automatically, or adjust motor power for each axis manually after connect with APP
5) Gimbal Parameters Setting
Timelapse, Panorama, Track Video:
SCORP: Support, can complete the settings on touch screen
SCORP-C: Support, need to connect with APP to set up

The max payload is about 2500g (well balanced before powered on).
Note: If the lens is too large and heavy, the gimbal may not be well balanced.

The SCORP-C uses 18650 battery, which is built-in and not removable.
It should be charged by USB Type C cable with a charging adapter of which the power is no more than 18W.

The charging port is under the multi-function knob, and above the trigger button;
It takes about 3 hours to fully charge with a 5V-2A charging adapter;
It supports fast charging up to 18W, by which it takes about 1.6 hours to fully charge.

For iPhone users, search “Feiyu SCORP” in APP Store to download the APP; For Android users, search “Feiyu SCORP” in Google Play Store to download it.
You can use the APP to update gimbal firmware, adjust gimbal parameters, remotely control gimbal directions etc.

1) Make sure the camera is tightly mounted and balanced in every axis;
2) Press the Motor Auto Tune button for 5 seconds until hearing a beep sound, the motors will start auto tuning, and finish while you hear a beep sound again.

Hold up the arm for a bit with one hand, then you can move the arm and tighten the screw easier. Release the arm when you finish balancing the axis.

Long press：turning on/off
Single press (when in sleep mode): wake up from sleep mode
Double press：enter sleep mode

1) Single press: switch among Pan mode (default), Pan&Tilt mode, All Follow Mode, Flash Mode and Lock Mode
2) 5-time press: horizontal calibration. When the Bluetooth indicator turns solid from flashing status, it means completion. tap the M button to return to the working state

- Pan Mode: the camera only follows the left and right rotation of the handle, and keeps facing the same directions for other two axis (The tilt axis keeps vertical, and roll axis keeps horizontal)
- Pan&Tilt Mode: The camera follows the left and right, up and down rotation of the handle, while the roll axis keeps being horizontal
- All Follow Mode: The camera follows the rotation of the gimbal handle in all three axis with no limit angle
- Flash Mode: The camera follows the rotation of the gimbal handle in all three axis with a faster speed and no limit angle
- Lock Mode: The camera faces the same direction no matter how you rotate the gimbal handle