Refurbished Feiyu AK4500(Ship to US ONLY)

There are two kinds of quick release plate together in one. Bottom mounting plate is compatible with Manfrotto PL501, Upper quick release plate is compatible with ARCA quick release system, which can be removed from the gimbal together with the camera, and fast switch between two popular quick release systems without re-assembling and re-balancing the camera.

Pan follow: The roll and tilt direction are fixed, and the camera moves according to the left-right movements of user's hand.
Follow mode: The roll direction is fixed, and camera moves according to the left-right movements, up-down movements of user's hand.
Lock mode: The orientation of the camera is fixed.
All Follow Mode: All three axis of gimbal follows the movements of user's hand.

USB cable control: Control picture-taking with camera button, control the recording with video button, it works with Sony, Canon, Nikon, Panasonic camera in controllable listing.
WIFI control: Gimbal can connect with camera via Feiyu ON app and WiFi. When connection is done, camera could be controlled to take photo/video/zoom/follow focus.
Note:
1. WiFi feature should be included so that camera could be connected via WiFi.
2. Digital Zoom and Follow Focus could be performed when they are supported (Please refer to the camera compatibility list).
Because Sony does not open source of protocol, thus Follow focus is supported by Sony cameras. If needed, please attach a external follow focus to Sony Camera.

Auto-adapt of Motor power is available to the Feiyu ON App or Touch Screen. Gimbal automatically adjust the motor power according to the camera you install.
Auto Adapt operation: Enter the payload setting through touch screen, and tap Auto Adaption, then put gimbal on the table until the display prompt complete.
Note: It's normal for the gimbal to vibrate slightly during automatic weighing.

There are NINE extended ports in single handle:
One 1/4 thread hole on the top of sliding arm of tilt axis for installation of extension support or other accessories

One 1/4 thread hole behind tilt motor

USB port and 3.5mm round hole Under mounting plate to connect and control camera

Each USB Port at the back and in front of mounting plate to connect external AFKII

1/4 thread hole at the left and right side of pan motor to extension support other accessories, such as monitor, Mic, etc.

1/4 thread hole at the bottom of the handle to mount Tripod or other accessories

Sony USB cable: USB2.0 to Micro(A01)*1，Canon USB Cable: USB 2.0 to Mini(B01)*1, 5D Mark IVUSB Cable: USB 3.0 to Micro 3.0(A02)*1, Shutter release for Panasonic (L1)*1, Nikon&EOS R USB Cable: USB 2.0 to TypeC(C01)*1, Bottom mounting pate*1, Upper quick release plate *1, support frame for tilt axis and round holder and long screw*1 set, 18650 battery*4, Underslung arm and tighten screw*1 set, anti-slip tripod*1, support frame for lens and fixed screw*1, Thumb screw to fix the camera*1, Micro USB charging cable*1, battery charger*1, EPP box.
Note: Nikon&EOS R USB Cable: USB 2.0 to TypeC(C01)*1 is not in the package yet.

Brushless AFKII*1, Underslung arm and tighten screw*1 set, Hyperlink remote control*1set, Sony USB cable:USB2.0 to Micro(A01)*1, Canon USB Cable: USB 2.0 to Mini(B01)*1, 5D Mark IVUSB Cable: USB 3.0 to Micro 3.0(A02)*1, Shutter release for Panasonic (L1)*1, Nikon&EOS R USB Cable: USB 2.0 to TypeC(C01)*1, Bottom mounting pate*1, Upper quick release plate *1, support frame for tilt axis and round holder and long screw*1 set,, 18650 battery*4, Carbon Fiber extension bar*1, anti-slip tripod*1, support frame for lens and fixed screw*1, Thumb screw to fix the camera*1, Micro USB charging cable*1, battery charger*1, EPP box.
Note: Nikon&EOS R USB Cable: USB 2.0 to TypeC(C01)*1 is not in the package yet.