30-Day Returns | Available Overseas Stock
Sale USD $259.00 USD $699.00
About 4.6kg/10.14lbs (well balanced)
About 1.6kg/3.53lbs (not included the battery, cable, camera, lens, etc.)
429*240*175.3mm (detachable support bracket not included)
Aluminum Alloys
Not Water-proof
18650 rechargeable battery*4, 2200mAh, 3.7V (please pay attention to installation of batteries)
Battery charging via USB port on gimbal is not supported. Please use the charger provided for charging batteries.
≥5 hours by the charger provided and the adapter 5V/3A (quick charger is banned).
When the indicator on charger give a solid red light, that means batteries are charging. With a solid blue light, batteries are fully charged.
12 hours (when camera is balanced with gimbal)
Tilt: 230°(with limitation)
Roll: 360° (unlimited)
Pan: 360° (unlimited)
Tilt: +175° to -55°
Roll: 360° (when parallel to the ground, and works in Dutch-Angle shoot mode, it could be automatically rotated 360°in one circle or several circles)
Pan: 360° (unlimited)
Feiyu ON
iOS 9.0 or later
Android 6.0 or later
There are two kinds of quick release plate together in one. Bottom mounting plate is compatible with Manfrotto PL501, Upper quick release plate is compatible with ARCA quick release system, which can be removed from the gimbal together with the camera, and fast switch between two popular quick release systems without re-assembling and re-balancing the camera.
Pan follow: The roll and tilt direction are fixed, and the camera moves according to the left-right movements of user's hand.
Follow mode: The roll direction is fixed, and camera moves according to the left-right movements, up-down movements of user's hand.
Lock mode: The orientation of the camera is fixed.
All Follow Mode: All three axis of gimbal follows the movements of user's hand.
USB cable control: Control picture-taking with camera button, control the recording with video button, it works with Sony, Canon, Nikon, Panasonic camera in controllable listing.
WIFI control: Gimbal can connect with camera via Feiyu ON app and WiFi. When connection is done, camera could be controlled to take photo/video/zoom/follow focus.
Note:
1. WiFi feature should be included so that camera could be connected via WiFi.
2. Digital Zoom and Follow Focus could be performed when they are supported (Please refer to the camera compatibility list).
Because Sony does not open source of protocol, thus Follow focus is supported by Sony cameras. If needed, please attach a external follow focus to Sony Camera.
Auto-adapt of Motor power is available to the Feiyu ON App or Touch Screen. Gimbal automatically adjust the motor power according to the camera you install.
Auto Adapt operation: Enter the payload setting through touch screen, and tap Auto Adaption, then put gimbal on the table until the display prompt complete.
Note: It's normal for the gimbal to vibrate slightly during automatic weighing.
There are NINE extended ports in single handle:
One 1/4 thread hole on the top of sliding arm of tilt axis for installation of extension support or other accessories
One 1/4 thread hole behind tilt motor
USB port and 3.5mm round hole Under mounting plate to connect and control camera
Each USB Port at the back and in front of mounting plate to connect external AFKII
1/4 thread hole at the left and right side of pan motor to extension support other accessories, such as monitor, Mic, etc.
1/4 thread hole at the bottom of the handle to mount Tripod or other accessories
Sony USB cable: USB2.0 to Micro(A01)*1,Canon USB Cable: USB 2.0 to Mini(B01)*1, 5D Mark IVUSB Cable: USB 3.0 to Micro 3.0(A02)*1, Shutter release for Panasonic (L1)*1, Nikon&EOS R USB Cable: USB 2.0 to TypeC(C01)*1, Bottom mounting pate*1, Upper quick release plate *1, support frame for tilt axis and round holder and long screw*1 set, 18650 battery*4, Underslung arm and tighten screw*1 set, anti-slip tripod*1, support frame for lens and fixed screw*1, Thumb screw to fix the camera*1, Micro USB charging cable*1, battery charger*1, EPP box.
Note: Nikon&EOS R USB Cable: USB 2.0 to TypeC(C01)*1 is not in the package yet.
Brushless AFKII*1, Underslung arm and tighten screw*1 set, Hyperlink remote control*1set, Sony USB cable:USB2.0 to Micro(A01)*1, Canon USB Cable: USB 2.0 to Mini(B01)*1, 5D Mark IVUSB Cable: USB 3.0 to Micro 3.0(A02)*1, Shutter release for Panasonic (L1)*1, Nikon&EOS R USB Cable: USB 2.0 to TypeC(C01)*1, Bottom mounting pate*1, Upper quick release plate *1, support frame for tilt axis and round holder and long screw*1 set,, 18650 battery*4, Carbon Fiber extension bar*1, anti-slip tripod*1, support frame for lens and fixed screw*1, Thumb screw to fix the camera*1, Micro USB charging cable*1, battery charger*1, EPP box.
Note: Nikon&EOS R USB Cable: USB 2.0 to TypeC(C01)*1 is not in the package yet.
1) Shutter release cable:
Shutter release cable for Panasonic cameras *1
Shutter release cable for Canon cameras *1
Shutter release cable for Sony cameras *1
2) WiFi control: ak4500 could be connecting WiFi with some types of Canon, Panasonic and Sony cameras. For the detail please refer to the list, which were upload the our official website.
3) USB cable control: four cable is available in Standard accessory and partial camera of Canon, Sony and Nikon is controllable.
1) Please make sure that the firmware of the gimbal is in the latest version(APP-gimbal upgrade-“USB HUB upgrade”).
2) Choosing the correct shutter release cable according to the “compatible Cameras for Reference for ak4500”.
3) Please make sure that one side of the USB cable were connected with the correct USB port on the left side of the gimbal’s fixing plate (Camera control), the other side of the USB cable were connected to corresponding interface of the camera.
4) Please mark sure the WiFi for the gimbal was unconnected.
Nikon camera is not support WiFi connect.
Some of Nikon cameras could be control by the USB shutter release cable conneceted properly (Such as Z6/Z7)
After firmware upgrade is finished, the gimbal will have buffer for a minutes when turn on. Please press the power button for 8-10 seconds, let go until the screen is light up completely.
1)Please check whether or not the contact pin can rebound by single taping them, and if all the pins are in good condition. We can see the contact pin is already damaged as below.
2) Refresh the gimbal’s firmware, exclude the influence of the software issues
1) Please make sure the version for gimbal’s firmware and keyboard firmware are in latest.
2) Please make sure the setting for the touch screen were set up properly, please check with following: Scroll setting-Camera ctrl-AKFII.
3) Make sure the function of the magic ring were set up with focus control (Kindly see below picture shown).
4) Make sure the gimbal did not connected with shutter release cable/ supply power to another device.
1) Please make sure the lens support and lens are installed properly.
2) Replace low damping lens, make sure that whether follow focus can work properly.
Before turning on the gimbal, please make sure all the three axes are balanced properly, the following is a video for your reference: https://www.youtube.com/watch?v=JeVgVwyxwJo
About vibration, which might be caused by the reasons below:
1) Turn on the gimbal before balancing three axes properly.
2) After balanceing all the three axes, did not tighten all the screws.
3) For the long lens, please make sure the lens support is installed properly.
4) The motor strength is too strong. (You can identify which motor need to be adjusted in this way: Hold one of the motors in working status with your hand, if it stops vibration, that’s the right motor you should decrease motor strength.)
Battery charging via USB port on gimbal is not supported. Please use the charger provided for charging batteries.
Can it work with Nikon d5300
We are sorry to tell you that AK4500 is not compatible with the Nikon d5300. The camera can only be mounted and stabilized on the gimbal, but camera functions or parameters cannot be directly controlled by the gimbal.