Get Ready! Halloween Sale Coming Soon!
From Oct 17 to Oct 31
Lightning Deals End in
dayshoursminssecsSale USD $479.00 USD $629.00
Feiyu SCORP Pro 3-Axis Camera Handheld Stabilizer
334.6*195.8*274mm (balancing position)
353.1*75.3*234.9mm (folded position)
About 2.1kg/4.63lbs (including quick release plate, not included other accessories and camera)
About 4.8kg/10.58lbs (well balanced)
Synthetic macromolecular resin,Alumninum Alloys
Splash-proof
3-axis Motor
1.3'' OLED Touchscreen
Tilt:+110°~-45°
Roll:+20°~-20°
Pan:360°(Unlimited)
Tilt: 340°(With limitation)
Roll: 340°(With limitation)
Pan: 360°(Unlimited)
Lithium Cell
2500mAh, built-in battery cannot be removed, charge it via the USB-C port
12 hours
13V-16.8V
-10°- 45°C
About 2.75 hours (Using 18W fast charger)
Feiyu SCORP
iOS 9.0 or later
Android 6.0 or later
Pan follow, only the pan axis follows the hand movement
Pan and tilt follow, only the pan and tilt axes follow the hand movement
Pan, tilt and roll follow, all three axes follow the hand movement
All three axes do not follow the hand movement, the gimbal keeps the fixed direction of the camera
Flash follow, all three axes follow the hand movement at high speed
3/8 inch thread hole*1, with the 3/8- 1/4 inch thread insert (Standard accessory), user can also mount Tripod which using 1/4 inch screw;
ARCA quick release base plate *1, can fast mount gimbal on popular quick release systems without re-assembling camera;
Type-C charging port*1, charge for gimbal and remote control handle;
ARRI rosettes*2;
quick release mount for remote control handle *1, for installation of remote control handle;
Type-C extension port*2 to connect focus motors;
Type-C camera control port*1, Type-C image transmission port*1;
1/4 inch thread hole*1, for installation of lens holder;
Type-C charging port*1, handle charging only;
While connecting the gimbal and your camera with cable (standard accessories for SONY, CANON, NIKON, Panasonic), users can control picture-taking/recording with shutter button and set aperture, shutter, ISO and other camera parameters (see Camera Compatibility List for more).
Auto Tune operation:
Enter the motor power setting through the touchscreen or Feiyu SCORP App, select Auto Tune, and then place the gimbal on the table until the display prompts that calibration is complete. The gimbal will automatically adjust the motor power based on the camera and lens you have installed.
*It's a normal phenomenon that gimbal will vibrate slightly while Auto Tune to weigh the camera. When using a new camera and lens combination, it is recommended to Auto Tune the motor power after installing the camera and turning on the gimbal.
SCORP Pro main body*1, Remote control handle*1, Tripod*1
Data cable USB 2.0 to Type-C*1, Shutter cable Type-C to Micro(A03)*1, Shutter cable Type-C to Mini (B02)*1, Shutter cable Type-C to Type-C (C02)*1, Shutter cable Type-C to TRS2.5 (T02)*1, Sony shutter cable Type-C to Multi*1, Panasonic shutter cable (DC2.5mm) Type-C to 2.5mm*1
Quick release plate*1, Camera backing base*1, Lens holder*1, Lens holder screw*1, Camera fixed screw*3, 3/8- 1/4 inch thread insert (the thread insert is factory mounted on tripod)*1
I discovered that a lot of the stabilizing feels like metal on metal. Some paint has already started to chip from light handling. Do not try to adjust the stabilizer with a heavy camera attached. Besides that. The stabilizer is GREAT.
Awesome gimbal which I am still setting up.
Would like to see some quick release attachments available like the folding handles but with out the handles..
A part that can be bolted to different things.
Also a module that has ExpressLRS in that connects to the Bluetooth on the gimbal for unlimited range control.. and that would be absolutely amazing for filmmakers.. running wireless systems..
I bought the SCORP Pro after researching gimbals sturdy enough to carry a Kinefinity Terra cinema camera. I’d seen some mixed reviews if other brands equipment but every review regarding the SCORP Pro was positive. And now I can see why.
1. Set up- is a breeze due to the locking axis and motor calibration
2. QUALITY!- I found aluminium in places I expected plastic. Where there is plastic it’s soft touch quality plastic. Tolerances are excellent. The feel of this gimbal has to be experienced.
3. Versatility- yup, it does everything you’d expect it to. Plus, it can do it remotely AT NO EXTRA COST, it’s built in.
The only negative, and it’s a small one really, the user manual is pretty light on detail so best get familiar with the (admittedly excellent) Feiyutech web site.
Oh, and the value for money is unbelievable.
I’d like Feiyutech to add Kinefinity to the list of supported camera brands but for now I can work around that. Not forever though Feiyutech!
Can’t wait to get on set with this baby.
I really like that’s the scorp pro it dose a lot of things I like It I like the flexibility to it
This gimbal looks really amazing ! Strong, powerfull, usefull, but I come from the AK4000 and I find the structure pointing to us quite unusefull.
This big stuff (battery place) is sometimes annoying to manipulate the gimbal close to the body, you miss 30 cm of background in motion.
works fine till yestserday - multifunction handle touchpaneel functions no more available no lighting - but buttons still working.
In today's video, we review the new Feiyutech Scorp Pro gimbal for DSLR, mirrorless and cinema cameras. With a huge max payload, unique design and a detachable, wireless controller arm, the Scorp Pro is full of impressive features making it a great choice for professional video for users with bigger and heavier camera setups, but it's not without its flaws.
Only support cable control. Controllable camera focus, take pictures, and record video. For the details please refer to the camera compatibility list.
(1) The battery for Feiyu SCORP Pro is build-in.
(2) Support 18W fast charger(9V/2A). It will take around 3 hours to fully charge the batteries with a 9V/2A output charger. The indicator is red when charging, and it turns to green when fully charged.
(3) The stabilizer will charging the remote control while install properly.
About 12 hours(Center of gravity of stabilizer is balanced).
The quick release plate measures 133x50x11 mm and the camera backing base measures 50x38x14 mm.
(1) Please check whether the stabilizer is in sleep mode, and make sure all the motor locks are unlocked. Next, wake up the stabilizer by single tap the power button or click the moon icon on the touch screen.
(2) Please make sure the remote control handle is installed properly. Please remove the remote control and reinstall again, then turn the stabilizer on by long press the power button about 5 seconds.
(3) Please make sure the battery were fully charged.
(1) Please make sure all those three axes were balanced properly with camera, and all the motor locks are unlocked, as well as all the screws are tighten properly.
(2) Motor power does not match the weight of camera, please try to set up the motor strength to Auto tune or manually adjust the motor strength on the touch screen.
When the stabilizer drifts due to changes in the environment or some misoperations, please make sure the working mode is not work with FPV mode, then slide left on the main page, and select stabilizer settings/horizontal calibration/auto calibration. (The drift of the gyroscope will cause stabilizer work abnormal.)
Please make sure the working mode is not work with FPV mode, then slide left on the main page, and select stabilizer settings/horizontal calibration/auto calibration.
(1) Control the pan, tilt and roll axis(under the axis-control state)
(2) Control zooming in/out electronically
(3) Control Focus motor
(4) Adjust stabilizer/camera parameters (Aperture, shutter speed, ISO, motor strengths, follow speed, dead zone, joystick speed, horizontal calibration, etc.)
Please make sure that the stabilizer and camera are connected properly (the camera&lens needs to support electronic zoom). Swipe on the main page, press and hold the knob function switch button to change control to electronic zoom. Turn the knob to zoom in/out.
(1) Attach Follow Focus to the rod, and make sure the follow focus gear is attached to teeth on the gear ring belt fixed on your camera lens. After installing them with stabilizer properly, then turn the stabilizer on, press and hold the knob function switch button to change control to Follow Focus control.
(2) Calibrating the Follow Focus: Swipe on the main page, rotate the lens’focus ring to the farthest focus point,next, rotate to the nearest focus point. (Notes: After remove the cable while using, when plugging with cable again, we will need to re-calibrate the Follow Focus.)
(1) Controlling the axises: Long press A,B or C button to record the current position of the axis, single tap A,B or C button, stabilizer will automatically turn to the point that were been recorded on previously.
(2) Controlling Follow Focus: Long press A,B or C button to record the focus range on the lens, single tap A,B or C button, the lens will automatically turn to the focus range that were been recorded on previously.
(3) Controlling zoom in/out: Long press A or B button to record the points, single tap A or B button to zoom in/out between points A and B.( Since unable to obtain the camera range, the point A and B will be inaccurate.)
Time-lapse, Auto rotation, Panoramic, Portrait, Selfie, Track video
(1) The farthest controllable distance between the remote control and Feiyu SCORP Pro is about 20 meters.
(2) The farthest controllable distance between Feiyu SCORP App and Feiyu SCORP Pro is about 30 meters(This will be affected by the bluetooth signal of the smartphone).
Feiyu SCORP Pro will enter sleep mode if user didn't balance it or unlock axis locks. Please make sure the camera were balanced properly, as well as all the motor locks were unlocked. Please single tap the power button to wake up the stabilizer, next, adjust the motor strength to match the weight for the camera. (Notes: Double tap the power button to enter into sleep mode, wake up the stabilizer by click the moon icon on the touch screen.)
IOS version: Go to the App Store to search for Feiyu SCORP to download.
Android version: Go to Google play to search for Feiyu SCORP to download.
After connecting bluetooth between stabilizer and Feiyu SCORP successfully, the App do have following functions: upgrade the firmware, parameters settings and control the stabilizer by the virtual joystick, etc.
(1) Please make sure the network is in good condition.
(2) Before turn the stabilizer on, please make sure the remote control were installed with the stabilizer properly.
(3) Please enter into the remote control interface, next, click the settings icon, select Firmware update.
(Note: Please do not press any buttons during the upgrade process; please keep the phone screen always on during the upgrade process; the firmware upgrade will take a long time, please wait patiently for about 13 minutes.)
can work with canon Rebel T6?
It can be mounted and stabilized on the gimbal, but the gimbal cannot control the camera functions or parameters.
Hello.Do you have a manual (how to use) for the scorp pro Gimbal free for downloding?? Also do you have a video (beside the commercial video) presenting and explaining the futures of this new gimbal??? Thank you for your time...
Hello. For product manual or tutorials, please check the 'Download' section of the product page. Thank you.
Is one motor for Focus/Zoom included in the package (like in the picture)... if yes/no how to add the two ? is it the same as for AK series AKFII ?
The follow focus for the SCORP Pro gimbal is not included in the package and needs to be purchased separately. And the SCORP follow focus motor is different from AK series AKFII, please refer to this page: https://store.feiyu-tech.com/products/follow-focus-for-scorp
Hello. Can I use two focus motors on the scorp pro?
Yes, SCORP Pro supports two follow focus motors. You can use one for focus control and another for zoom control, and use two multifunction knobs to control each.
does It works with canon 6d mark ii ?
Yes, SCORP Pro works with Canon 6d mark ii camera via Type-C to Mini cable(included in the package). Controllable camera functions are Take Photo, Start/Stop Recording Video, Playback, Pull Focus, Shutter Speed, Aperture, ISO.
For more gimbals compatible with 6D mark ii, please check this page: Camera Function Query
Hi, When the remote is detached, for example when using it with the carbon frame, can any of the knobs/ buttons be used to re-centre on the remote?
When the remote is detached, you can choose to re-center the gimbal via the touch screen of the remote. In addition, you can also use the Feiyu SCORP app to re-center the gimbal or double click the Trigger button on the gimbal body.
Where can I find a tutorial video on this gimbal?
For more tutorial videos about the Scorp Pro gimbal, please view: Scorp Pro Tutorials
i have a FX6 is it compatible?
Sorry to tell you that Scorp Pro is not compatible with the FX6 camera.
Can you mount an external monitor?
Yes, there are ARRI rosettes at the left and right side of Scorp Pro versatile cross arm, and you can mount an external monitor on the Scorp Pro handle.
How do you set up and use the zoom function using a Sony A7Siii
First, please make sure you are using the Type-C to Multi cable and power on the gimbal before the camera. And then set [Zoom Setting] to be "Clear Image Zoom" or "Digital Zoom" to enable Digital Zoom.