Black Friday Sitewide 20% Off | 11.24 - 12.3
Hurry up! Sale Ends in
dayshoursminssecs Sale USD $359.00 USD $599.00
Save 40%
About 4.6 kg/10.14 lbs (well balanced)
429*240*175.3mm (not included Detachable support frame)
About 1.6 kg/3.53 lbs (not included the battery, cable, camera, lens, etc.)
Aluminum Alloys
Not Water-proof
18650 rechargeable battery*4, 2200mAh, 3.7V (please pay attention to installation of batteries)
Battery charging via USB port on gimbal is not supported. Please use the charger provided for charging batteries.
≥5 hours by the charger provided and the adapter 5V/3A (quick charger is banned).
When the indicator on charger give a solid red light, that means batteries are charging. With a solid blue light, batteries are fully charged.
12 Hours (When camera is balanced with gimbal)
Tilt: 230°(with limitation)
Roll: 360° (Unlimited)
Pan: 360° (Unlimited)
Tilt: +175° to -55°
Roll: 360° (when parallel to the ground, and works in Dutch-Angle shoot mode, it could be automatically rotated 360°in one circle or several circles)
Pan: 360° (unlimited)
There are two kinds of quick release plate together in one. Bottom mounting plate is compatible with Manfrotto PL501, Upper quick release plate is compatible with ARCA quick release system, which can be removed from the gimbal together with the camera, and fast switch between two popular quick release systems without re-assembling and re-balancing the camera.
Pan follow: The roll and tilt direction are fixed, and the camera moves according to the left-right movements of user's hand.
Follow mode: The roll direction is fixed, and camera moves according to the left-right movements, up-down movements of user's hand.
Lock mode: The orientation of the camera is fixed.
All Follow Mode: All three axis of gimbal follows the movements of user's hand.
USB cable control: Control picture-taking with camera button, control the recording with video button, it works with Sony, Canon, Nikon, Panasonic camera in controllable listing.
WIFI control: Gimbal can connect with camera via Feiyu On app and WiFi. When connection is done, camera could be controlled to take photo/video/zoom/follow focus.
Note:
1. WiFi feature should be included so that camera could be connected via WiFi.
2. Digital Zoom and Follow Focus could be performed when they are supported (Please refer to the camera compatibility list).
Because Sony does not open source of protocol, thus Follow focus is supported by Sony cameras. If needed, please attach a external follow focus to Sony Camera.
Auto-match of Motor power is available to the Feiyu On app or Touch Screen. Gimbal also performs the auto-match process after being turned on, according to the load detected.
There are nine extended ports in single handle AK4500(basic version)
One 1/4 thread hole on the top of sliding arm of tilt axis for installation of extension support or other accessories
One 1/4 thread hole behind tilt motor
USB port and 3.5mm round hole Under mounting plate to connect and control camera
Each USB Port at the back and in front of mounting plate to connect external AFKII
1/4 thread hole at the left and right side of pan motor to extension support other accessories, such as monitor, Mic, etc.
1/4 thread hole at the bottom of the handle to mount Tripod or other accessories
Sony USB cable: USB2.0 to Micro(A01)*1,Canon USB Cable: USB 2.0 to Mini(B01)*1, 5D Mark IVUSB Cable: USB 3.0 to Micro 3.0(A02)*1, Shutter release for Panasonic (L1)*1, Nikon&EOS R USB Cable: USB 2.0 to TypeC(C01)*1, Bottom mounting pate*1, Upper quick release plate *1, support frame for tilt axis and round holder and long screw*1 set, 18650 battery*4, Underslung arm and tighten screw*1 set, anti-slip tripod*1, support frame for lens and fixed screw*1, Thumb screw to fix the camera*1, Micro USB charging cable*1, battery charger*1, EPP box.
Note: Nikon&EOS R USB Cable: USB 2.0 to TypeC(C01)*1 is not in the package yet.
Brushless AFKII*1, Underslung arm and tighten screw*1 set, Hyperlink remote control*1set, Sony USB cable:USB2.0 to Micro(A01)*1, Canon USB Cable: USB 2.0 to Mini(B01)*1, 5D Mark IVUSB Cable: USB 3.0 to Micro 3.0(A02)*1, Shutter release for Panasonic (L1)*1, Nikon&EOS R USB Cable: USB 2.0 to TypeC(C01)*1, Bottom mounting pate*1, Upper quick release plate *1, support frame for tilt axis and round holder and long screw*1 set,, 18650 battery*4, Carbon Fiber extension bar*1, anti-slip tripod*1, support frame for lens and fixed screw*1, Thumb screw to fix the camera*1, Micro USB charging cable*1, battery charger*1, EPP box.
Note: Nikon&EOS R USB Cable: USB 2.0 to TypeC(C01)*1 is not in the package yet.
1) Shutter release cable:
Shutter release cable for Panasonic cameras *1
Shutter release cable for Canon cameras *1
Shutter release cable for Sony cameras *1
2) WiFi control: ak4500 could be connecting WiFi with some types of Canon, Panasonic and Sony cameras. For the detail please refer to the list, which were upload the our official website.
3) USB cable control: four cable is available in Standard accessory and partial camera of Canon, Sony and Nikon is controllable.
1) Please make sure that the firmware of the gimbal is in the latest version(APP-gimbal upgrade-“USB HUB upgrade”).
2) Choosing the correct shutter release cable according to the “compatible Cameras for Reference for ak4500”.
3) Please make sure that one side of the USB cable were connected with the correct USB port on the left side of the gimbal’s fixing plate (Camera control), the other side of the USB cable were connected to corresponding interface of the camera.
4) Please mark sure the WiFi for the gimbal was unconnected.
Nikon camera is not support WiFi connect.
Some of Nikon cameras could be control by the USB shutter release cable conneceted properly (Such as Z6/Z7)
After firmware upgrade is finished, the gimbal will have buffer for a minutes when turn on. Please press the power button for 8-10 seconds, let go until the screen is light up completely.
1)Please check whether or not the contact pin can rebound by single taping them, and if all the pins are in good condition. We can see the contact pin is already damaged as below.
2) Refresh the gimbal’s firmware, exclude the influence of the software issues
1) Please make sure the version for gimbal’s firmware and keyboard firmware are in latest.
2) Please make sure the setting for the touch screen were set up properly, please check with following: Scroll setting-Camera ctrl-AKFII.
3) Make sure the function of the magic ring were set up with focus control (Kindly see below picture shown).
4) Make sure the gimbal did not connected with shutter release cable/ supply power to another device.
1) Please make sure the lens support and lens are installed properly.
2) Replace low damping lens, make sure that whether follow focus can work properly.
Before turning on the gimbal, please make sure all the three axes are balanced properly, the following is a video for your reference: https://www.youtube.com/watch?v=JeVgVwyxwJo
About vibration, which might be caused by the reasons below:
1) Turn on the gimbal before balancing three axes properly.
2) After balanceing all the three axes, did not tighten all the screws.
3) For the long lens, please make sure the lens support is installed properly.
4) The motor strength is too strong. (You can identify which motor need to be adjusted in this way: Hold one of the motors in working status with your hand, if it stops vibration, that’s the right motor you should decrease motor strength.)
Battery charging via USB port on gimbal is not supported. Please use the charger provided for charging batteries.
Hello, can fit Canon R6+adapter+Tamron 24-70?
Yes, the ak4500 can use with canon r6+adapter+Tamron 24-70 with cable control.
What is the difference(s) between essential kit and standard kit besides the pricing?
The ak4500 standard kit is included the follow focus, extension pole and hyperlink remote control.
Compatible with Canon 6D mkii?
Yes, the ak4500 is compatible with canon 6D MarkII with wifi and cable control.
Is this compatible with Canon EOS R6?
Yes,the ak4500 is compatible with canon eos r6 via cable control.
Is AK4500 compatible with Sony FS5 mk2? thanks
The ak4500 is not compatible with Sony mk2
Is the AK4500 compatible with Canon EOS 7D mark ii?
The AK4500 is not compatible with Canon EOS 7D mark ii.
Hi, is Ak4500 compatible with Canon Rebel Eos T6i, Canon Rebel Eos T1i or Canon Rebel Xs. Regards. Rodrigo Eckholt
AK4500 is not compatible with Canon Rebel Eos T6i, Canon Rebel Eos T1i or Canon Rebel Xs.
DEAR SIR, IS PANASONIC G85 IS COMPATIBLE WITH AK 4500? IF YES WHAT CONTROLS OF CAMERA IS ON GIMBAL?
AK4500 is compatible with Panasonic DMC-GX85GK, control taking photo / video.
Ist im "AK 4500 Essential Kit + Gittergriffkäfig auch der Doppelgriff-Gitterkäfig enthalten (599 Dollar) oder nur im "AK 4500 Standard Kit + Doppelgriff-Gitterkäfig. Ist der AK4500 auch mit der Panasonic G9 kompatibel.
AK4500 Essential Kit+Dual Handle Grid Cage include AK4500 Essential Kit and Dual Handle Grid Cage.
AK4500 is not compatible with Panasonic G9.
Is this gimbal compatible with the 5dmark iii
AK4500 is not compatible with canon 5D mark iii to control it, but can carrry & balance on gimbal to keep it stability.
Would the ak4500 gimbal be compatible with the new canon rebel t8i? thanks
AK4500 gimbal is not compatible with the new canon rebel t8i.
Tengo la handycam Sony AX700, ¿es compatible con el AK4500? Gracias.
AK4500 gimbal is not compatible with Sony AX700.
You can view the full compatible camera list: Digital DSLR Camera Compatible List
What’s the difference between the Essentials kit and Standard Kit (AK4500)
Hi,
AK4500 Standard Kit include the extra three items comparing with Essential kit:
C275 Extension *1
Remote control *1
AKF2 Follow focus kit *1
This product is compatible with the Nikon Coolpix P1000 ?
Nikon Coolpix P1000 can only be mounted and stabilized on the AK4500, but camera functions or parameters cannot be controlled.
Compatible with the Fujifilm XT3
AK4500 is not compatible with the Fujifilm XT3. For your reference, these gimbals are compatible with Fujifilm XT3: SCORP Mini, G6 Max, Scorp C, Scorp, Scorp Pro, AK2000S, AK2000C
Please check this page for the controllable camera functions: Camera Function Query
Is the Panasonic GH5 and the Sigma 18-35 lens compatible with the AK4500?
Yes, AK4500 is compatible with Panasonic GH5 and Sigma 18-35 lens
Compatible with the Nikon Z 30?
No, AK4500 is not compatible with Nikon Z30. For the gimbals compatible with Z30, please check this page: Camera Funtion Query
Compatible with the Nikon Coolpix P1000
Nikon Coolpix P1000 can only be mounted and stabilized on the AK4500, but cannot be controlled.
Compatible with Canon R7?
AK4500 is not compatible with Canon R7.
For the gimbals compatible with R7, please check this page: Camera Function Query
is can work with canon eos 2000d ?
AK4500 cannot work with canon eos 2000d. The camera can only be mounted and stabilized on the gimbal, but the gimbal cannot control camera functions.
Compatible with canon Eos 2000d?
No, Canon EOS 2000D is not compatible with AK4500. The camera can only be mounted and stabilized on the gimbal, but the gimbal cannot control the camera functions or parameters, such as take photo, record video, ISO.
Will it work w nikon d810