AK2000C and AK2000S Comparison, Camera Compatibility List
2.2kg/4.85lbs (Well balanced)
1.1kg/2.38lbs (Built-in battery, not included shutter release cable, camera, lens and so forth)
147.4*203.6*372.8mm (Normal state)
Aviation Aluminum Alloys
(required operating system: iOS 9.0 or later, Android 6.0 or later)
Tilt: 230°(with limitation)
Tilt: +175° to -55°
Roll: +153° to -153
Pan: 360° (Unlimited)
Built-in battery, 2200mAh, 7.4V
Charge it via USB-C port on gimbal.
7h for normal working state, 12h for standby mode (well balanced)
≥1.5h, Support all the normal charger and quick charger which charging power≤18W
(for example: 9V*2A=18W, 12V*1.5A=18W)
There are TWO kinds of quick release plate together in one.
Bottom mounting plate is foldable which is convenient for storage.
Upper quick release plate is compatible with ARCA quick release system, which can be removed from the gimbal together with the camera, and fast switch between popular quick release systems without re-assembling and re-balancing the camera.
Pan follow: The roll and tilt direction are fixed, and the camera moves according to the left-right movements of user's hand. (tilt axis keep vertical and roll axis keep horizontal)
Follow mode(Pan and tilt): The roll direction keep horizontal, and camera moves according to the left-right movements, up-down movements of user's hand.
Lock mode: The orientation of the camera is fixed no matter how the handle rotates.
All Follow Mode: All 3 axis of gimbal follows the movements of handle without limitation.
USB cable Control: While connecting gimbal and cameras with cable (standard accessories for SONY, CANON, NIKON, Panasonic), users can control picture-taking/recording/Auto-burst shot with shutter button (please see Camera Compatibility List for more)
WIFI control: Gimbal can connect with camera via Feiyu On app and WiFi. When connection is done, camera could be controlled to take photo/video.
1. WiFi feature should be included so that camera could be connected via WiFi.
2. Users can use Sony Type C to Multi cable to control SONY cameras (but cannot charge it, which is more stable and rapid reaction).
Auto adaption of motor power is available on the touch screen or in the Feiyu ON app. Gimbal adjust the motor power automatically according to the camera installed.
Auto Adapt operation: Enter the payload setting through touch screen, and tap Auto Adaption, then put gimbal on the table until the display prompt complete.
*When automatically adapting to the weighing camera, the gimbal will vibrate slightly, which is a normal phenomenon.
1. Change working mode via touch screen or buttons, directly show the state of camera connection, Bluetooth, control state, battery at the display without APP.
2. One tap to enter Inception mode, long exposure timelapse, VLOG Selfie and portarit shooting for TikTok, and more special shooting ways.
3. Manually set up the rotation speed, picture interval, long exposure time and the movement route in auto-rotation mode for long exposure timelapse.
4. Switch between portrait and landscape mode.
5. Control and set up the camera, taking photo, recording, with USB cable control or WIFI control.
6. Customize thetrigger button, motor power, shooting scene(follow speed/dead zone), controlled object, etc.
7. Initialize the gimbal when it is not level.
8. Manually set up the shooting angle on tilt axis by hand.
9. Upgrade the firmware, set up the parameter, virtual remote control in the Feiyu ON APP.
There are 8 extended ports in single handle.
On the top of sliding arm of tilt axis: One 1/4 thread hole for installation of extension support or other accessories.
On the top of motor of tilt axis: Type-c camera control port to connect with control cable.
In front of quick release plate: 1/4 inch thread hole, for installation of Lens holder.
At the left and right side of handle: 1/4 inch thread hole to extension support other accessories, such as monitor, Mic , versatile arm and so forth.
At the bottom of the handle: 1/4inch thread hole and 3/8inch thread hole to mount Tripod or other accessories.
At the right side of handle: USB-C port for quick charging and update firmware(need a separate USB adapter)
ARCA quick release plate *1, Lens holder + fixed screw *1, Fixed screw to fix the camera(short) *1, Wrench *1, Anti-slip metal tripod *1
Data cable USB2.0 to Type-C *1, Control cable Type-C to Type-C (C02)*1, Control cable Type-C to TRS2.5 (T02) *1, Control cable Type-C to Micro (A03)*1, Shutter cable for Panasonic DC2.5mm (Type-C to 2.5mm) *1, Shutter cable for Sony Type-C to Multi *1
It will take around 1.5 hours for fully charged the battery.
It support charging by the adapter, which is less than 18W(Such as 9V*2A=18W, 12V*1.5A=18W)
The battery for ak2000C is built-in.
When the gimbal work with stand by mode , which could work around 12 hours ;
Using for shooting, which could work around 7 hours(please make sure all those three axises were balanced properly).
1)Before turn the gimbal on, please make sure all those three axises were been balanced properly.
2)Please set up the payload setting on the OLED touch screen to auto adaption mode.
Long press:Turning on/off
Single tap(on the main interface):Lock/unlock Single tap(on other interface):Back to the main interface Double tap:Stand by mode(Single tap to wake it up)
Single tap:Switch between pan follow/Lock mode
Double tap:Pan and tilt follow
Triple tap:All follow mode
Single tap: Switch mode between taking picture/recording video
Reset gimbal, 3 axis return to default position
Long press: Enter Follow Mode, back to previous mode after loose it.(You can set up this operation to Lock mode, follow mode, action mode with APP)
Triple tap: Selfie mode(Turn 180° at pan axis )，double tap to reset.
1)USB Cable Control：Connecting gimbal and cameras with correct cable. Users can control focus/taking picture/recording video/Auto-burst shot with shutter button. (For the details, please refer to the Camera Compatibility List)
2)WIFI Control:Gimbal can connect with camera via Feiyu On app and WiFi. When connection is done, camera could be controlled to take photo/video/zoom/follow focus. (For the details, please refer to the Camera Compatibility List)
Note: 1)Only supports the compatible cameras from Sony, Canon and Panasonic.
2)Zoom and follow focus require camera support. See the list of compatible cameras for specific supported functions.
3)For Sony cameras, it is recommended to use the Sony Type C to Multi cable for faster and more stable control.
Please long press the power button for about 10 seconds, and release it while the OLED touch screen fully light up.
The battery for AK2000C is built-in, and they are 2 pcs of 18650 INR batteries.
Charging by the USB cable and the Type-C port on the handle, the maximum input for the quick charger adapter is 18W
Be the first to ask a question about this.