Wearable action camera gimbal



Elevation Design

FlagshipSold out

WG2X 3-Axis Wearable Brushless Gimbal Stabilizer for Action Camera

USD $169.00

Condition: New See Refurbished Item

FeiyuTech WG2X 3-Axis Wearable Brushless Gimbal Stabilizer for Action Camera - Compatible with GoPro Hero 10/9(Uncontrolled, Adapter Required)/8/7/6/5/Yi 4K/SJCAM/AEE/Ricca Action Camera

  • Wearable, Lightweight and Splashproof
  • Special Elevation Design, Stable Base, Anti-slip Design
  • 360° Unlimited Rotated Angle: helps you to take wide footage
  • Auto-rotation Mode: fit for motion time-lapse or automatic shooting
  • Maximum Payload: 130 g/0.29 lbs
  • Dimensions: 3.52*3.07*4.04 inches
  • Runtime: about 2.5 hours
  • Weight: only 238 g/0.52 lbs
  • Compatible with Extension Rod and Tripod: suitable for all the accessories of GoPro base adapter with 1/4 inch T-head connector

Hurry up! Sale Ends in


Kits: WG2X

  • WG2X

WG2X Structure

1 / 2 Structure Instruction
2 / 2 Size Dimension

Main Features

  • Lighter gimbal to lighten the load.
  • Unlimited rotated angles in tilting and panning motor to take wide footage.
  • Splashproof function let you make a smooth clip in a foggy day.
  • Session adapter with long screws,allow you switch between Hero and Session series easily.
  • The optional RX0 adapter gives you more choice.
  • Soft protection pad on the panning motor to well protect the camera.
  • Anti-slip design on the button and side, make you hold it steadily .
  • Power on and off with a reminder of the beep can be heard clearly outdoors.
  • Automatically enter standby mode if turning on without camera to protect the motor.
  • Intelligent initialization automatically check motionless desk and finish it with a reminder of the beep.
  • Intelligently follow pre-set route in auto-rotation mode, fit for motion time-lapse or automatic shooting.
  • Quick upgrade ,set up the parameter ,reset and virtual remote control with APP.
  • Several working mode make most of the videos easily to be done.
  • Suitable for all the accessories of Gopro base adapter with 1/4 inch T-head connector, which can be mounting on helmet, bicycle, selfile pole,etc.
  • Compatible with extension bar and tri-pod with 1/4 inch thread hole at the button and side.

Compatible Action Camera

  • WG2X is compatible with GoPro HERO 10/9(Uncontrolled)/8/7/6/5/YI 4K/SJCAM/AEE/Ricca,etc, and the cameras with similar size as Gopro. The maximum payload is 135g.
  • It can compatible with HERO Session series by session mounting plate.
  • It can also compatible with Sony RX0/RX0 Ⅱ with additional RX0 adapter.


Gimbal Usage

Adaptive Device and Size

GoPro HERO 10/9(Uncontrolled)/8/7/6/5/YI 4K/SJCAM/AEE/Ricca etc.;
Similar Cameras Size with Gopro;
HERO Session Camera Series with Session mounting plate; Sony RX0/RX0 Ⅱ with additional RX0 adapter.

Maximum payload

0.298lb/135g(In balanced status)

Rotation Angle

Tilt: 360°;
Roll: 310°(Structure range), 70° (Limit angle after camera mounted);
Pan: 360°.

Mounting way

Inverted mounted(Camera can be in left/right side)
Vertical mounted(Camera can be in left/right side);
Forward mounted(Camera can be in left/right side)

Playing Modes

Pan Mode(Default), Follow Mode (Pan and tilt), Auto-rotation Mode, Lock Mode

Balance Adjustment

Make gimbal balanced with the movement of cross arm

Manual Lock


Reset / Initialization


Camera Control

Photography or Video control


Camera Mode Switch

Video mode and Photo Mode shooting



Gimbal bluetooth connect to Feiyu ON App


Control Action camera via Wi-Fi on App


Working Time

2.5h(wifi function on)


Build-in lithium battery,1500mAh,3.7V/p>


5V/2A power charger;
Charging via USB port is supported

Charging Time

About 2h(using a 5V/2A charger)





0.52lb/238g(without Camera)

Extended Interface

2 1/4 inch Thread holes(on the bottom of handle)

Main Materials

Aluminum Alloys

Firmware Upgrade



Splash-proof. It is banned from using under water, and being exposed to salt water


Standard Accessories

1Pcs USB Cable;
1Pcs Session mounting platel;
2Pcs short screw;
2Pcs long screw;
1Pcs 1/4 inch T-head connector;
1Pcs EPP bag

Optional Accessories

Extension bar;
RX0 adapter;
General accessories of Gopro

WG2X Compatible Camera
Brand Model Carried Wi-Fi Mount
Gopro Hero 10/9 Support No Hero 10/9 Mount
Gopro Hero 8 Support Support Hero 8 Mount
Gopro Hero 7 Support Support Standard
Gopro Hero 6 Support Support Standard
Gopro Hero 5 Support Support Standard
Gopro Hero 4 Support Support Standard
Gopro Session Series Support No Session Mount
MI YI 4K Support Support Standard
SJcam SJ6 LEGEND Support Support Standard
DJI Osmo Support No Standard
AEE AEE Series Support No Standard

Customer Reviews

Based on 19 reviews
Jonathan Persson
Gimbal with potential

A small gimbal perfect for wearing or mounting. Unfortunately the gimbal easily gets stuck in the wrong direction when moving around. It also randomly chooses the wrong initial direction, hence filming into itself. The default mount gives the gimbal poor balancing which drains the battery, this can easily be fixed however by using a custom mount.

Tim Sørensen
Gimbal function works perfect ... still

It would be nice to being able to control it all on the app for DJI OSMO action as you can with GOPRO .... so please can you make an update in the software to do this if possible ?

Iztok Poredos


As described

Good product take a bit of time to get use too and sometime react funny in extreme use but make stable movie in rude and shaky environment

micheal jobson
Love it

Essential if you want POV footage that is watchable. But because this gimbal fits so many cameras, it doesn't do any one purfect. Your primary goal is to balance your camera in all axis. The pan axis you can't really control, the roll axis can be adjusted using the built in arm adjuster and you will have to get creative with the yaw axis. For my session camera this took tapeing 3 Canadian $2 coins to the back of the camera and with my hero 4 camera a lense cap addition helped with the balance. This step is very important if you will use the gimbal in any activities which will result in, if you don't on hard landings the camera will yaw and ruin your footage.This gimbal shipped with a gopro mount adapter so don't order one (like I did)Also if you're using a chesty type harness, don't mess about with the gopro tripod mount to gopro shoe mount. This will cause the gimbal to stick out along way and isn't too secure. My solution was to remove the gopro shoes off a gopro chesty harnes, drill a hole thorough the backing plate and hard bolt (using 1/4" bolt) the chesty directly to the bottom threaded mount on the gimbal.There are alot of little tricks to getting the most out of this gimbal so be sure to watch some youtube vids which explain how everything works.I'll never use a gopro without a gimbal again. Awesome product, love using it. Buy one

User Manual


Tutorials on YouTube


Is it compatible with Gopro 10/9?

Does it support Gopro 8?

What is the maximum payload for the WG2X?

Is it waterproof?

How to balance it?

How to pow on/off?

How many mounting way?

How to connect to cameras?

Not enough items available. Only [max] left.
Add to WishlistBrowse WishlistRemove Wishlist
Shopping cart

Your cart is empty.

Return To Shop

Add Order Note: Edit Order Note
Estimate Shipping
Add A Coupon

Estimate Shipping

Add A Coupon

Coupon code will work on checkout page