124.5*40.5*30mm(working state)

The net weight is 115g(including the build in battery). The Material of the gimbal is make by Aluminum Alloys and ABS/PC.

Feiyu Pocket has one Built-in rechargeable battery, which capacity is 875mAh,6.738Wh and voltage usually 7.7V. Chargeing the battery through USB C port directly. For the useage time, it is 4.5h(Working at 1080p@60fps), 3.5h(Working at 4K@30fps). The gimbal does not connecting with App and work with image transmission(PCCAM) function.

1.2h (with 10W charger), the better is charging with 5V/2A charger. The indicator is solid red while charging. When the battery is fully charged, it turns to green.

It is not splash-proof.

For the “Feiyu Cam” App, we could down it load by Google Play/App store. After connecting with the Feiyu Cam App successfully, we could with with image transmission, taking picture and download file etc.. PS: When first download the Feiyu Cam App, which will require log in by the phone number or mailbox.

Firstly, turn on the gimbal WiFi by long press the shutter button about 3-5 seconds, or swipe down to enter into the setting menu, kindly see below:

Secondly, opening WiFi on the phone

Thirdly, turn on the App, click “connect to new device”, next enter the last four charectors of the camera name. Kindly see below show:

Connecting with Feiyu Cam App successfully, we could work with more functions by click “Camera Live”, kindly see below:

Controlling by the OLED: Swipe down to enter into the setting memu, then turn on the tilt control setting, next back to the main interface, you will find the button control tilt on the right side. Kindly see below show:

Controlling by the Feiyu Cam App: After connecting with Feiyu Cam successfully, click “Camera Live”, then you could find the joystick control on the mid of bottom. Kindly see below show:

There are two ways for upgrade the firmware for Feiyu Pocket, one way is upgrade by the App, the other way is upgrade the firmware by the MicroSD.
Upgrade the firmware by Feiyu Cam App:
After connecting with Feiyu Cam App, click “Mine”, then click “...”,it means more settings, next choose “Upgrade Feiyu Pocket”. Kindly see below show:

Upgrade the firmware by MicroSD:
Please download the gimbal’s firmware on our official website by your PC:

Then copy the firmware to the MicroSD root directly.

Next install the MicroSD properly and turn the gimbal on, the gimbal will be detect and upgrade the firmware automatically. In this case, please DO NOT take off the MicroSD.

Swipt down to enter into the setting menu, then click “Calibration” to calibrate the gibmal. For more details, kindly see below:

For Super high quality, the video bit rate is up to 120Mbps (the highest bit rate supported by Sony A7M3 is 100Mbps), which can reduce the noise and distortion calibration effect of video.

Max Capacity:512G(Suggest working with U3 and higher speed SD Card, minimum write rate> 30MBps)

1) When taking photos or videos, you could check the room of remaining photos or video duration at the bottom of the main page.

2) Check the free space for the MicroSD by swipt down to enter into the setting menu, then swipe left twice.

1) Take of the MicroSD and export through the card reader.
2) When the gimbal turn on, copy the videos and picture by connect the PC thuough a USB-Type C cable, then select Udisk mode.Kindly see below:

3) Connecting with phone, we could download the original pictures and videos to our phone through Feiyu Cam App.

The maximum support 4K, 3840 * 2160 4K: 3840 * 2160 supports 60/50/48/30/25/24 FPS video shooting; 2.7K: 2704 * 1520 supports 60/50/48/30/25/24 FPS video shooting; 1080P: 1920 * 1080 supports 120/60/50/48/30/25/24 FPS video shooting.

Swipt left to enter into the shooting setting, then select “Video setting”to set up the resolution for the video.

MOV / MP4

JPG / JPG+DNG

The synthesized photos need to be connected with Feiyu Cam App for viewing.

1) We could figure it out by the battery icon, which is on the upper right corner on the main interface .
2) Swipt donw to enter into the settings menu, click the “settings icon”, then you could see the remaining power percentage. Kindly see below show:

On the gimbal itself, which will support set up with two points, which are the start and stop points. When connected with Feiyu Cam App, which could be support set up with 10 points.

There are 2*2 , 3*3 ,180° , kindly see below:

Swipt down on the screen, then swipt left twice to enter Pro mode, next turn on this mode by click the “PRO icon”.

In this mode, we could set up the EXP, WB and Color.

Swipt down on the screen, then swipt left triple to enter”High brightness” setting, next single tap the icon in the middle of the screen to switch the brightness.As you could see, there are three options, which are low, medium and high brightness setting.

We could sharing the video by the Feiyu Cam App directly.

1) Swipe up on the screen, then click the “selfie icon”,kindly see the picture below show
2) Triple tap the mode button

1) The defual mode for Feiyu Pocket first using is TF mode, when shooting with hold the gimbal parallel to the ground, please switch the working mode to HF(pan mode) by click the “mode icon” with swipt up on the screen . Kindly see below show:

2) After switch working mode to HF(pan mode), when gimbal is parallel to the ground, the lens will be towards to the front automatically.

1) Hold the gimbal with vertical, rotating the gimbal to the left/right with 90 degrees, in this case, the gimbal will be parallel to the ground, the the view in the gimbal will be word with Portrait mode. 2) Hold the gimbal with vertical, rotating the gimbal to the left/right with 180 degrees, in this case, the gimbal will be shoot with upside down.

1) Switch working modes by click the “mode icon”with swipt up on the srceen. There are three working modes, HF mode(pan mode), TF mode(tilt mode) and AF mode(all follow mode).

2) Connecting with Feiyu Cam App, then switch the working mode by the mode button in the App, which is on the left corner at the bottom

3) Switch the working mode by the mode button on the gimbal, long press and hold will be working with Locking mode.

Switch the following speed by click the “following speed icon”with swipt up on the screen, kindly see below show:

Checking the pictures and videos by swipt right on the screen.

When the gimbal is on, connecting a Type C data cable with the computer, then select the external camera function(PCCAM), kindly see below show:

After the driver is automatically installed, we could confirm the new port in the device manager.

Set up with the PC, which with Windows10system, kindly see below: