AK2000C Handheld Ultralight 3-Axis Gimbal Stabilizer for Mirrorless/DSLR Camera with Tripod

There are TWO kinds of quick release plate together in one.
Bottom mounting plate is foldable which is convenient for storage.
Upper quick release plate is compatible with ARCA quick release system, which can be removed from the gimbal together with the camera, and fast switch between popular quick release systems without re-assembling and re-balancing the camera.

Pan follow: The roll and tilt direction are fixed, and the camera moves according to the left-right movements of user's hand. (tilt axis keep vertical and roll axis keep horizontal)
Follow mode(Pan and tilt): The roll direction keep horizontal, and camera moves according to the left-right movements, up-down movements of user's hand.
Lock mode: The orientation of the camera is fixed no matter how the handle rotates.
All Follow Mode: All 3 axis of gimbal follows the movements of handle without limitation.

USB cable Control: While connecting gimbal and cameras with cable (standard accessories for SONY, CANON, NIKON, Panasonic), users can control picture-taking/recording/Auto-burst shot with shutter button (please see Camera Compatibility List for more)
WIFI control: Gimbal can connect with camera via Feiyu On app and WiFi. When connection is done, camera could be controlled to take photo/video.
Tips:
1. WiFi feature should be included so that camera could be connected via WiFi.
2. Users can use Sony Type C to Multi cable to control SONY cameras (but cannot charge it, which is more stable and rapid reaction).

Auto adaption of motor power is available on the touch screen or in the Feiyu ON app. Gimbal adjust the motor power automatically according to the camera installed.
Auto Adapt operation: Enter the payload setting through touch screen, and tap Auto Adaption, then put gimbal on the table until the display prompt complete.
*When automatically adapting to the weighing camera, the gimbal will vibrate slightly, which is a normal phenomenon.

1. Change working mode via touch screen or buttons, directly show the state of camera connection, Bluetooth, control state, battery at the display without APP.
2. One tap to enter Inception mode, long exposure timelapse, VLOG Selfie and portarit shooting for TikTok, and more special shooting ways.
3. Manually set up the rotation speed, picture interval, long exposure time and the movement route in auto-rotation mode for long exposure timelapse.
4. Switch between portrait and landscape mode.
5. Control and set up the camera, taking photo, recording, with USB cable control or WIFI control.
6. Customize thetrigger button, motor power, shooting scene(follow speed/dead zone), controlled object, etc.
7. Initialize the gimbal when it is not level.
8. Manually set up the shooting angle on tilt axis by hand.
9. Upgrade the firmware, set up the parameter, virtual remote control in the Feiyu ON APP.

There are 8 extended ports in single handle.
On the top of sliding arm of tilt axis: One 1/4 thread hole for installation of extension support or other accessories.
On the top of motor of tilt axis: Type-c camera control port to connect with control cable.
In front of quick release plate: 1/4 inch thread hole, for installation of Lens holder.
At the left and right side of handle: 1/4 inch thread hole to extension support other accessories, such as monitor, Mic , versatile arm and so forth.
At the bottom of the handle: 1/4inch thread hole and 3/8inch thread hole to mount Tripod or other accessories.
At the right side of handle: USB-C port for quick charging and update firmware(need a separate USB adapter)

AK2000C *1
ARCA quick release plate *1, Lens holder + fixed screw *1, Fixed screw to fix the camera(short) *1, Wrench *1, Anti-slip metal tripod *1
Data cable USB2.0 to Type-C *1, Control cable Type-C to Type-C (C02)*1, Control cable Type-C to TRS2.5 (T02) *1, Control cable Type-C to Micro (A03)*1, Shutter cable for Panasonic DC2.5mm (Type-C to 2.5mm) *1, Shutter cable for Sony Type-C to Multi *1