Feiyu SCORP Pro 3-Axis Camera Handheld Stabilizer
334.6*195.8*274mm (Gimbal balancing position)
353.1*75.3*234.9mm (Gimbal folded position)
About 2100g/4.63 lb (including quick release plate, not included other accessories and camera)
Synthetic macromolecular resin,Alumninum Alloys
About 4.8kg/10.58 lb (well balanced)
Tilt: 340°(With limitation)
Roll: 340°(With limitation)
3/8 inch thread hole*1, with the 3/8- 1/4 inch thread insert (Standard accessory), user can also mount Tripod which using 1/4 inch screw;
ARCA quick release base plate *1, can fast mount gimbal on popular quick release systems without re-assembling camera;
Type-C charging port*1, charge for gimbal and remote control handle;
quick release mount for remote control handle *1, for installation of remote control handle;
Type-C extension port*2 to connect focus motors;
Type-C camera control port*1, Type-C image transmission port*1;
1/4 inch thread hole*1, for installation of lens holder;
Type-C charging port*1, handle charging only;
2500mAh, built-in battery cannot be removed, charge it via the USB-C port
About 2.75h (Using 18W fast charger)
iOS 9.0 or later
Android 6.0 or later
While connecting gimbal and cameras with cable (standard accessories for SONY, CANON, NIKON, Panasonic), users can control picture-taking/recording with shutter button and set aperture, shutter, ISO and other camera parameters (see Camera Compatibility List for more).
Auto Tune motor power is available to the App or Touch Screen. Gimbal auto tune the motor power according to the camera you install.
Auto Tune operation: Enter the motor power setting through touch screen, and tap Auto Tune, then put gimbal on the table until the display prompt calibration complete. Gimbal will vibrate slightly while Auto Tune to weigh the camera, it’s a normal phenomenon.
Monopod (Pay attention to its max payload)；
Feiyu SCORP Focus Motor；
Feiyu SCORP Image Transmission Transmitter；
Gimbal Cage for Feiyu SCORP Pro;
Dual Handle Grip for Feiyu SCORP Pro;
Carbon Fiber Extension Rod；
wireless microphone kit： wireless microphone ( transmitter terminal )*1、 wireless microphone (receiving terminal)*1，wireless clip-on microphone *1；
Body-mounted Weight Support for installing flash lamp/ soft light/ Microphone and other devices via cold shoes；
1. Change follow modes via touch screen/buttons, directly show the state of camera connection, Bluetooth, control object , battery at the display without APP.
2. One tap to enter Auto rotation mode (Inception mode), long exposure timelapse, VLOG Selfie and portrait shooting for TikTok, and more special shooting way.
3. Manually set up the rotation speed, picture interval, long exposure time and the movement route in auto-rotation mode for long exposure timelapse.
4. Built-in vertical mounting plate, which allows the camera to be installed on the gimbal in portrait mode.
5. One tap to switch between portrait and landscape mode.
6. Control picture-taking/recording with shutter button and set aperture, shutter, ISO and other camera parameters (see Camera Compatibility List for more).
7. Remote control gimbal via remote control handle.
8. Flexible axis arm, give more loading space.
9. Customize the some button functions, motor power, follow speed, dead zone, language, etc.
10. Initialize the gimbal when it is not level.
11. Manually set up the shooting angle on tilt axis and pan axis by hand.
12. Upgrade the firmware , set up the parameter, remote control on APP.