The payload of SCORP 2 is about 5.51lb/2500g(balanced status). Feiyu SCORP 2 is a gimbal stabilizer for DSLR Mirrorless cameras. It can support a variety of large cameras and lenses such as Sony, Canon, Panasonic, Nikon, and Fujifilm.

(1) Please fully charge the gimbal and try to turn it on again.
(2) The scroll switch may be accidentally pressed or stuck, causing the power button to force a shutdown and lose power.(This can be judged by turning the multifunction knob to see if there is any damping)
(3) If the gimbal still cannot be turned on, you may need to wait for the gimbal to be completely discharged and then recharge it before turning it on.

(1) Make sure all 3 axes are properly balanced and then turn the gimbal on.
(2) Make sure the screws on the sliding arms and the quick release plate are all tightened properly; Move the camera closer to the tilt axis; If the lens is long, use a lens holder to secure the camera lens.
(3) If the motor power does not match, please enter the motor power settings on the touchscreen or Feiyu SCORP app and select "Auto Tune", or manually adjust the power of each motor.

When one of the axes continues to rotate automatically due to changes in the usage environment or misoperation, you can switch to non-all-follow(FPV) mode, then slide left on the homepage and select "Gimbal Setting">"Horizon Calibration">"Auto Calibration". (Please make sure that the gimbal stays still when doing this)

Switch the gimbal to non-all-follow(FPV) mode, then swipe left on the main page and select "Gimbal Setting">"Horizontal Calibration". Turn the knob to adjust the roll axis to level, or adjust the controls on the touch screen.
NOTE: When adjusting the horizontal calibration under the all follow mode, the roll axis will not rotate in real time.

(1) Control the pan, tilt and roll axis (under the axis-control state)
(2) Control zooming in/out electronically
(3) Control Follow Focus motor
(4) Adjust gimbal/camera parameters (aperture, shutter speed, ISO, motor strengths, follow speed, dead zone, joystick speed, horizontal calibration, etc.)

First connect the camera (a camera that supports electronic zoom control is required), long press the knob function button to switch to electronic zoom, and then turn the knob to zoom.

(1) Connect the focus motor to Focus Motor Port 1, mount the camera and the focus motor properly. Then turn on the gimbal, slide up from the bottom edge of the home page, and long press the knob function button to switch to the focus motor.
(2) Set up the focus range: tap on "Knob settings"> "Calibrate focus motor range", then turn the knob to rotate the focus motor to the near end of the focus range, tap on "Next", then turn the focus motor to the far end.
Note: If the follow focus is disconnected and reconnected while powered on, the focus range will need to be recalibrated.

Smart tracking, Time-lapse, Auto rotation(space/inception mode), Panoramic shooting, Portrait mode, Selfie mode, Track video.

Swipe left from the right edge of the homepage > More > Language.

Swipe left from the right edge of the homepage > More > Version information.

For iOS version: enter the APP Store and search for "Feiyu SCORP" to install.
For Android version: enter the Google Play Store and search for "Feiyu SCORP" to install.
Main functions: gimbal firmware update, gimbal/camera parameter settings, remotely control the gimbal, etc.

(1) Ensure stable network connection.
(2) Turn on the gimbal, connect Feiyu SCORP app with the gimbal, go to "More">"Firmware Info", and update the firmware if there is a new version.
NOTE: Please do not press any button during the update process; please keep the phone screen on during the update process.

About 30 meters. (depending on the strength of the mobile phone's Bluetooth signal)

Swipe left from the right edge of the homepage, tap on "More"> "AI Power" to turn on the AI tracking module, and the AI indicator light will light up red. Then use the "OK" gesture at the appropriate distance to activate tracking (the light turns green).

(1) Make sure that the AI power is turned on:
Method 1: Swipe left from the right edge of the homepage, click "More" > "AI Power" to turn on the AI tracking module, and the AI indicator light will light up red.
Method 2: Press the F1 button three times to turn on the AI power.
(2) Start tracking:
Method 1: Keep your face within 1 to 4 meters in front of the AI sensor, then raise your hand to make an "OK" gesture. When the indicator light changes from red to green, the gimbal starts tracking your face.
Method 2: Keep your face in front of the AI sensor and long press the F1 button.
(3) Exit tracking:
Method 1: Facing the AI sensor within a range of 1 to 4 meters, raise your fists and put your thumbs together to exit tracking.
Method 2: When facing the AI sensor, press and hold the F1 button to exit tracking.
Method 3: Raise your hand and make the "OK" gesture to exit tracking.

(1) Turn off the AI Power and turn it on again, or restart the gimbal.
(2) When the gimbal is performing other functions (such as time-lapse shooting), the AI tracking function will temporarily stop working, and you need to exit the current function to use AI tracking.

【SCORP 2】：SCORP 2 main body*1, Tripod*1, USB 2.0 to USB-C charging cable*1, Camera control cable*7 (USB-C to Multi, USB-C to Micro, USB-C to USB-C, USB-C to TRS2.5, USB-C to DC2.5mm, USB-C to TRS3.5, USB-C to Mini), Allen key*1, Fixed plate*1, Slider*1, Quick release plate*1, Camera backing base*1, Lens holder*1, Lens holder screw*1, Camera fixed screw*3
【SCORP 2 Kit】：SCORP 2 main body*1, Tripod*1, USB 2.0 to USB-C charging cable*1, Camera control cable*7 (USB-C to Multi, USB-C to Micro, USB-C to USB-C, USB-C to TRS2.5, USB-C to DC2.5mm, USB-C to TRS3.5, USB-C to Mini), Allen key*1, Fixed plate*1, Slider*1, Quick release plate*1, Camera backing base*1, Lens holder*1, Lens holder screw*1, Camera fixed screw*3, ARRI Rosettes Expansion Mount*1, Expandable module*1, Carbon fiber 275mm extension rod*1, Storage bag*1