Caméra d'action stabilisée 3 axes portable et portable Feiyu Pocket 2S

Feiyu Pocket 2S has a built-in rechargeable battery, of which the capacity is 875mAh, 6.738Wh and voltage is about 7.7V. Charging the battery through USB-C port.
Usage time: 220 min while working at 1080p 60fps, and 190 min while working at 4K 30fps.

About 1.2h with 10W charger, 5V/2A charger is recommended. The indicator is solid red while charging, and solid green while fully charged.
Note: no continuous charging for more than 12 hours.

Yes it supports, but requires a dedicated Type C to 3.5mm MIC adapter. Microphone with power supply is recommended.

Not waterproof, but it has an optional accessory - 40Meters Waterproof Case.

1) Use a Micro HDMI to standard HDMI cable to connect the camera with a monitor.
2) Turn on the Pocket cam and switch to record mode.
3) Turn on the monitor and you will be able to preview the screen. The maximum output is 3840*2160 at 30 fps. (If the monitor only supports up to 1080P 60hz, then the camera output is 1080P 60 fps, note: HDMI does not support real-time voice feedback)

There is magnetic force on the bottom of gimbal head, the bottom of the handle and on the base adapter (with 1/4 inch thread hole), it can be directly adsorbed on a car, or wearable accessories that made of stainless steel.

You can download and install the Feiyu Cam APP from Google Play/App Store. After connecting the Feiyu Cam APP, you can use it for image transmission, taking pictures and downloading file, etc.
P.S. For the first time to use the Feiyu Cam App, it requires logging in by phone number or email.

Tap on the zoom button on the right side of the screen, pull it up and down to zoom in and out. It supports 1x to 4x digital zoom.

For Super high quality, the video bit rate is up to 120Mbps (As a comparison, the highest bit rate supported by Sony A7M3 is 100Mbps), which can reduce video noise.

Max Capacity supported: 512G. For recording Super Hight quality video, U3 and higher speed SD Card is required (minimum writing speed > 30MBps)

1) When taking photos or videos, you can check the amount of remaining photos or video duration at the bottom of the main screen.
2) You can also check the free space in the setting menu.

1) Remove the MicroSD Card and connect with a computer with card reader, then copy the files to the computer.
2) When the Pocket cam is on, connect with a computer with USB-C cable, select Udisk mode, then copy the files to the computer. Transmission rate for the port is about 22MB/s.
3) Connect with the Feiyu Cam APP, download the pictures and videos to your phone. Transmission rate≤3MB/s.

Maximum video resolution is 4K (3840 * 2160 for video)(4000*3000 for photo)
All the supported resolution and frame rate:
4K: 3840 * 2160 supports 60/50/48/30/25/24 FPS video shooting
2.7K: 2720 * 1520 supports 60/50/48/30/25/24 FPS video shooting
1080P: 1920 * 1080 supports 120/60/50/48/30/25/24 FPS video shooting

Swipe left to enter the shooting setting, then select “Video” to set up the resolution&frame rate for video shooting.

It requires to connect to the Feiyu Cam App and view the composed panoramic photos in the APP.

On the gimbal itself, you can set up with two points, which are the start and end points. On the Feiyu Cam App, it supports 10 points.

It supports 2*2, 3*3 and 180° panoramas.

Tilt the handle 90° from left or right and keep it vertically. (Note:4k48/50/60 and 1080P120 videos can not be displayed vertically on the camera screen)

In this mode, you can adjust EXP, WB and Color.

1) Double press the joystick to recenter
2) Control the camera direction while in the default interface
3) Switch files when on the file preview interface
4) Change volume (up/down) when playing back videos
5) Press to play and pause the video

Dead zone exists in all the follow modes, it’s for the smoothness while switching the gimbal from still to moving status.

It is recommended to do straight-line shooting in Pan mode or Lock mode.