General
Compatible Devices
iPhone 18 Pro/Pro Max, iPhone 17 Pro/Pro Max, iPhone 16 Pro/Pro Max, and iPhone 15 Pro/Pro Max
Material of Main Body
Aluminum alloy
Weight
About 490g/1.08lb
Dimensions
About 310*149*50mm
Battery
Capacity
1300mAh, built-in battery cannot be removed, charge it via side USB-C port, support all the normal charger and quick charger which charging power≤18W
Operating Voltage
6.8V-8.4V
Theoretical Battery Life
About 40min
Charging Time
About 1.5h
Memory Card / External Drive
When using a memory card or external drive for external recording, the storage must meet the following requirements:
(1) Recommended minimum sustained write speeds:
1080p @ 30 fps: ≥ 30 MB/s,
1080p @ 60 fps: ≥ 80 MB/s,
4K @ 30 fps: ≥ 130 MB/s,
4K @ 60 fps: ≥ 300 MB/s
(Actual performance may vary depending on scene complexity.)
(2) Memory card / external drive must be formatted as APFS or exFAT. Do not enable password protection.
Extended Ports
Both sides of cooling phone holder:
Cold shoe x1 – for mounting third-party accessories.
1/4" thread hole ×1 – for attaching additional accessories.
Top of the rig:
High-speed HUB cable ×1 – connects directly to a smartphone.
Left and right sides of the rig:
USB-C extension ports ×2 – for connecting microphones, external drives, or other accessories.
USB-C charging port ×1 – supports direct charging.
Storage card slot ×1 – for convenient access and storage.
1/4" thread holes ×2 – for attaching the handle.
Rig base:
1/4" thread hole ×1 – compatible with tripods.
Arca-Swiss interface ×1 – for mounting on a gimbal or other compatible accessories.
Handle (top and bottom): 1/4" thread holes ×2 (each side) – for mounting various third-party accessories.
Handle (front and rear): 1/4" thread holes ×2 (each side) – for additional accessory expansion.
In the Box
Feiyu Video Rig for Smartphone*1, Handle*2, Mini Tripod*1, USB-A to USB-C Charging Cable*1