|Battery type||2200mAh,7.4V，Charge it via USB-C port on gimbal, Built-in battery cannot be removed|
|Usage time||7h for normal working state, 12h for standby mode（well balanced）|
|Charging Time||≥1.5h, Support all the normal charger and quick charger which charging power≤18W(for example: 9V*2A=18W, 12V*1.5A=18W)|
|Materials In Main Body||Aviation Aluminum Alloys|
|Weight||1078g（Built-in battery ,not included shutter release cable, camera, lens and so forth）|
|Payload||2.2Kg/4.85 lb(well balanced)|
|Dimensions (W x D x H)||147.4*203.6*372.8mm (Normal state), 68.8*208.2*347.8mm (Storage)|
|Rotatable Range||Tilt:230°(with limitation)
|Controllable Range||Tilt:+175°to -55°
|Quick release plate||There are two kinds of quick release plate together in one.
Bottom mounting plate is foldable which is convenient for storage;
And upper quick release plate is compatible with ARCA quick release system, which can be removed from the gimbal together with the camera, and fast switch between popular quick release systems without re-assembling and re-balancing the camera.
|Installation of Camera and Balance||Unlock the motor: AK2000C has 3 motor locks, Please unfold the gimbal and lock the motor to mount the camera. After installation, unlock each motor to balance the gimbal, then turn on the gimbal.
Tighten the camera: Insert upper quick plate vertically on bottom mounting plate, and fix the mounting plate with safety lock.
Optional Multifunctional bracket: Fix hot shoe at upper side of the camera with fixing frame of tilt axis to get two-way fixation and install more accessories.
① When lens facing front, tilt motor should be at the right side because of tilt limitation.
② When the lens is longer than the mounting plate, please install lens supporting frame.
Balance:Step by step to adjust vertical and horizontal direction of tilt axis, roll axis and pan axis. The standard of balance: camera can stay there without holding by hand ,no matter where you point it to (tilt axis should be perfectly balanced).
|Working mode||Pan follow： The roll and tilt direction are fixed, and the camera moves according to the left-right movements of user's hand. (tilt axis keep vertical and roll axis keep horizontal)
Follow mode(Pan and tilt)： The roll direction keep horizontal, and camera moves according to the left-right movements, up-down movements of user's hand.
Lock mode： The orientation of the camera is fixed no matter how the handle rotates.
All Follow Mode： All 3 axis of gimbal follows the movements of handle without limitation.
|Touch Screen||Main interface： Show working state, change working mode and operation Main display shows different camera modes (After connecting WIFI), Bluetooth, Zoom & Follow Focus & the axis controlled by Multifunction Knob, Battery, and Working Modes. Icon in grey means the option is not available.
Swipe to left Once & Twice：Adjust the parameters of camera when Wifi connection between gimbal and camera is done, including ISO, Exposure Compensation, Scenes, etc.
Swipe to right for one time：Interface to enter inception mode, time-lapse mode, selfie mode and portrait mode
Swipe to right for two time：payload,shooting mode, joystick and system setting
Lock/unlock screen: Just single tap the power button to lock or unlock the touch screen.
|Button operations||★ Mode Button（front side）：
When shutter release cable or WIFI of camera is connected with gimbal and camera, users can control camera through gimbal (See Camera Compatibility List for more)：
|How to control the camera||USB cable Control: WWhile connecting gimbal and cameras with cable (standard accessories for SONY,CANON,NIKON, Panasonic) ,users can control picture-taking/ recording/Auto-burst shot with shutter button (see Camera Compatibility List for more) WIFI control Gimbal can connect with camera via Feiyu On app and WiFi. When connection is done, camera could be controlled to take photo/video.
|Motor Power Auto-Adaption||
|Available Functions for Users||
|Extended Ports||There are 8 extended ports in single handle:
On the top of sliding arm of tilt axis : One 1/4 thread hole for installation of extension support or other accessories.
On the top of motor of tilt axis: Type-c camera control port to connect with control cable.
In front of quick release plate: 1/4 inch thread hole, for installation of Lens holder.
At the left and right side of handle: 1/4 inch thread hole to extension support other accessories, such as monitor, Mic , versatile arm and so forth.
At the bottom of the handle: 1/4inch thread hole and 3/8inch thread hole to mount Tripod or other accessories.
At the right side of handle: USB-C port for quick charging & update firmware(need a separate USB adapter)
It will take around 1.5 hours for fully charged the battery.
It support charging by the adapter, which is less than 18W(Such as 9V*2A=18W, 12V*1.5A=18W)
The battery for ak2000C is built-in.
When the gimbal work with stand by mode , which could work around 12 hours ;
Using for shooting, which could work around 7 hours(please make sure all those three axises were balanced properly).
1)Before turn the gimbal on, please make sure all those three axises were been balanced properly.
2)Please set up the payload setting on the OLED touch screen to auto adaption mode.
Long press:Turning on/off
Single tap(on the main interface):Lock/unlock Single tap(on other interface):Back to the main interface Double tap:Stand by mode(Single tap to wake it up)
Single tap:Switch between pan follow/Lock mode
Double tap:Pan and tilt follow
Triple tap:All follow mode
Single tap: Switch mode between taking picture/recording video
Reset gimbal, 3 axis return to default position
Long press: Enter Follow Mode, back to previous mode after loose it.(You can set up this operation to Lock mode, follow mode, action mode with APP)
Triple tap: Selfie mode(Turn 180° at pan axis )，double tap to reset.
1)USB Cable Control：Connecting gimbal and cameras with correct cable. Users can control focus/taking picture/recording video/Auto-burst shot with shutter button. (For the details, please refer to the Camera Compatibility List)
2)WIFI Control:Gimbal can connect with camera via Feiyu On app and WiFi. When connection is done, camera could be controlled to take photo/video/zoom/follow focus. (For the details, please refer to the Camera Compatibility List)
Note: 1)Only supports the compatible cameras from Sony, Canon and Panasonic.
2)Zoom and follow focus require camera support. See the list of compatible cameras for specific supported functions.
3)For Sony cameras, it is recommended to use the Sony Type C to Multi cable for faster and more stable control.
Please long press the power button for about 10 seconds, and release it while the OLED touch screen fully light up.
The battery for ak2000C is built-in, and they are 2 pcs of 18650 INR batteries.
Charging by the USB cable and the Type-C port on the handle, the maximum input for the quick charger adapter is 18W
Hello, it is possible to add a follow focus on the AK2000C for the Sony Alpha 6400 (Please can you give me the link to buy it)? And it is possible with the smartphone application to control the focus for the A6400? Thank you
Hello, sorry to tell you that we don't have a follow focus for the AK2000C gimbal.
Is it compatible with Nikon d5100
Nikon d5100 can only be mounted and stabilized on the AK2000C, but the gimbal cannot control the camera.
Compatible with the Canon R5?
Yes, the ak2000c can use with cnaon r5 with cable control.
Is this gimbal compatible with the cannon 6D Mark ii?
Yes, the ak2000c can use with canon 6d mark II with WIFI or cable control.
Hi, AK2000c is compatible with Nikon Z50?
Yes, the ak2000c is compatible with nikon z50 with cable control.
Can the ak2000c work with the dual handle grip?
The ak2000c can't use with dual handle grip, and the ak2000, ak4000 and ak4500 can use.
Hello Is the ak2000c gimbal compatible with the canon 250d?
Yes, the ak2000c gimbal is compatible with the canon 250d with WIFI or cable control.
¿Es compatible el AK2000C con la Sony A6400?
Yes, the ak2000c is compatible with sony a6400 with WIFI or cable control.
I would like to get this for the Canon EOS M50. Will the cable control and gimbal work with the camera?
Yes, the ak2000c is compatible with canon eos m50 with Wifi and cable control.
Is the ak2000c compatible with the dslr nikon d3300?
the ak2000c is not compatible with the dslr nikon d3300
Is the ak2000c compatible with the sony a6100?
Yes, the ak2000c is compatible with the sony a6100 with cable control.
Is the ak2000c compatible with the canon t3i?
The ak2000c is not compatible with the canon t3i
Hello, is this gimbal compatible with Canon eos m6 Mark II?
Yes, the ak2000c is compatible with Canon M6 Mark II with WIFI and cable control
Does Hyperlink remote work with my Ak2000c?
Yes, the hyperlink remote can work with ak2000c
Hello, I have a Nikon D5600, ¿It works with the AK2000C?
The ak2000c is not compatible with nikon d5600
The gimbal is compatible with Canon Sl3?
The ak2000c is not compatible with canon sl3
Does the Canon EOS R6 work with the gimbal ?
Yes,the ak2000c is compatible with canon eos r6 via cable control
hello ,does the ak2000 work with Canon Eos 800D
The ak2000 cannot use with canon eos 800d
Can i use my Sony a6000 and do focus in video?
The ak2000c is not support the focus in video with sony a6000
Is it compatible with Canon D60?
The AK2000C is not compatible with canon 60 d
hi! Is the AK2000C compatible with the Canon 90D?
Yes,the ak2000c is compatible woth canon 90d with cable control
Is the Nikon D3100 compatible with the AK2000C?
The AK2000C is not compatible with Nikon D3100
Is the AK2000C compatible with the Canon 6D?
The ak2000c is compatible with cannon 6d,the ak2000/ak4000/ak4500 can.
Hello! Is this gimbal compatible with the Canon T7i (800D)?
The AK2000C is not compatible with Canon t7i
Hello, I currently own a Nikon D5500 and would like to know if it is compatible with the AK2000C / 2000S model? Thanking you
Hello,the nikon d5500 cannot use with the AK2000C/2000S.
does the FeiyuTech AK2000C work with my SONY RX10 III ?
Yes, the AK2000C can work with SONY RX10 III by cable control.
Canon 2000d can be mounted and stabilized on the AK2000C, but the gimbal cannot control the camera functions or parameters.
AK2000C is not compatible with Canon EOS R7.