Wearable action camera gimbal
Wearable
Auto-rotation
Elevation Design
$169.00
FeiyuTech WG2X 3-Axis Wearable Brushless Gimbal Stabilizer for Action Camera - Compatible with GoPro Hero 10/9(Uncontrolled, Adapter Required)/8/7/6/5/Yi 4K/SJCAM/AEE/Ricca Action Camera
Hurry up! Sale Ends in
dayshoursminssecsGoPro HERO 10/9(Uncontrolled)/8/7/6/5/YI 4K/SJCAM/AEE/Ricca etc.;
Similar Cameras Size with Gopro;
HERO Session Camera Series with Session mounting plate; Sony RX0/RX0 Ⅱ with additional RX0 adapter.
0.298lb/135g(In balanced status)
Tilt: 360°;
Roll: 310°(Structure range), 70° (Limit angle after camera mounted);
Pan: 360°.
Inverted mounted(Camera can be in left/right side)
Vertical mounted(Camera can be in left/right side);
Forward mounted(Camera can be in left/right side)
Pan Mode(Default), Follow Mode (Pan and tilt), Auto-rotation Mode, Lock Mode
Make gimbal balanced with the movement of cross arm
Yes
Yes
Support
Video mode and Photo Mode shooting
Gimbal bluetooth connect to Feiyu ON App
Control Action camera via Wi-Fi on App
2.5h(wifi function on)
Build-in lithium battery,1500mAh,3.7V/p>
5V/2A power charger;
Charging via USB port is supported
About 2h(using a 5V/2A charger)
89.3mm*Max78.1mm*102.5mm
0.52lb/238g(without Camera)
2 1/4 inch Thread holes(on the bottom of handle)
Aluminum Alloys
Yes
Splash-proof. It is banned from using under water, and being exposed to salt water
1Pcs USB Cable;
1Pcs Session mounting platel;
2Pcs short screw;
2Pcs long screw;
1Pcs 1/4 inch T-head connector;
1Pcs EPP bag
Extension bar;
Tri-pod;
RX0 adapter;
General accessories of Gopro
Brand | Model | Carried | Wi-Fi | Mount |
---|---|---|---|---|
Gopro | Hero 10/9 | Support | No | Hero 10/9 Mount |
Gopro | Hero 8 | Support | Support | Hero 8 Mount |
Gopro | Hero 7 | Support | Support | Standard |
Gopro | Hero 6 | Support | Support | Standard |
Gopro | Hero 5 | Support | Support | Standard |
Gopro | Hero 4 | Support | Support | Standard |
Gopro | Session Series | Support | No | Session Mount |
MI | YI 4K | Support | Support | Standard |
SJcam | SJ6 LEGEND | Support | Support | Standard |
DJI | Osmo | Support | No | Standard |
AEE | AEE Series | Support | No | Standard |
A small gimbal perfect for wearing or mounting. Unfortunately the gimbal easily gets stuck in the wrong direction when moving around. It also randomly chooses the wrong initial direction, hence filming into itself. The default mount gives the gimbal poor balancing which drains the battery, this can easily be fixed however by using a custom mount.
It would be nice to being able to control it all on the app for DJI OSMO action as you can with GOPRO .... so please can you make an update in the software to do this if possible ?
Ok
Good product take a bit of time to get use too and sometime react funny in extreme use but make stable movie in rude and shaky environment
Essential if you want POV footage that is watchable. But because this gimbal fits so many cameras, it doesn't do any one purfect. Your primary goal is to balance your camera in all axis. The pan axis you can't really control, the roll axis can be adjusted using the built in arm adjuster and you will have to get creative with the yaw axis. For my session camera this took tapeing 3 Canadian $2 coins to the back of the camera and with my hero 4 camera a lense cap addition helped with the balance. This step is very important if you will use the gimbal in any activities which will result in, if you don't on hard landings the camera will yaw and ruin your footage.This gimbal shipped with a gopro mount adapter so don't order one (like I did)Also if you're using a chesty type harness, don't mess about with the gopro tripod mount to gopro shoe mount. This will cause the gimbal to stick out along way and isn't too secure. My solution was to remove the gopro shoes off a gopro chesty harnes, drill a hole thorough the backing plate and hard bolt (using 1/4" bolt) the chesty directly to the bottom threaded mount on the gimbal.There are alot of little tricks to getting the most out of this gimbal so be sure to watch some youtube vids which explain how everything works.I'll never use a gopro without a gimbal again. Awesome product, love using it. Buy one
The Gopro 10/9 can mount on the gimbal with Gopro 10/9 adapter(optional), but the gimbal couldn't control the Gopro 10/9 via WIFI or Bluetooth. So you can only use the gimbal for Gopro 10/9 for stabilization purpose.
Yes, only when the firmware version of the gimbal is 1.07 or higher can it be connected to the Gopro 8.
The maximum payload is 135g.
Only splash-proof. It is banned from using under water, and being exposed to salt water.
With the movement of the rolling arm to find the perfect balance status for different cameras.
POWER ON: Long-press the function button until the green light is on.(Release it until the beep is on)
POWER OFF:Long-press the function button until the light is solid red.(Release it until the beep is on)
Inverted mounted (The camera in left or right side will be both fine)
Vertical mounted(The camera in left or right side will be both fine)
Forward mounted(The camera in left or right side will be both fine)
1. Turn on WiFi of action camera
2. Connect with Feiyu ON App, click the icon“Connect camera” at the top of virtual joystick
3. Select camera model (GoPro or RX0), and find the camera in the WIFI list
4. Input WIFI password, and wait for the connection to be done.
5. Use the mode button or shutter button to control the camera.